What Is Tris Hydroxyethyl Triazine CAS 4719-04-4? Uses, Specifications, and Procurement Considerations
Tris Hydroxyethyl Triazine, identified by CAS 4719-04-4, is a nitrogen-containing organic compound used in certain industrial biocide formulations. It is also known by names such as tris(2-hydroxyethyl)hexahydro-1,3,5-triazine. Buyers commonly assess it for microbial control in industrial systems, including selected oilfield, water-treatment, and metalworking-fluid applications. Its suitability depends on the supplied grade, the formulation, local regulations, and compatibility with the system where it will be used.
If you are looking for more details, kindly visit our website.
The compound has the molecular formula C9H21N3O3 and a molecular weight of approximately 219.28 g/mol. For procurement, the CAS number is a useful identity check, but it is not a complete specification: buyers should also confirm active content, physical properties, packaging, documentation, and application-specific requirements with the supplier.
Key Takeaways
- CAS 4719-04-4 identifies Tris Hydroxyethyl Triazine, a triazine-based chemical used in some industrial biocide products.
- Commercial material may be supplied as a formulation or solution, so grade and concentration should be confirmed rather than assumed.
- Compare suppliers using a current technical data sheet, safety data sheet, certificate of analysis, and clear shipment and packaging terms.
- Before use, check the product’s regulatory status and suitability for the intended process and jurisdiction.
What Is Tris Hydroxyethyl Triazine?
Tris Hydroxyethyl Triazine is an organic compound built around a saturated triazine ring with three hydroxyethyl substituents. Those structural features help identify the chemical, but they do not by themselves establish how a particular commercial product will perform. Performance depends on factors such as concentration, formulation, operating conditions, and the microorganisms present.
In industrial supply chains, the name may refer to the active chemical or to a product containing it in a specified concentration. Buyers should therefore distinguish the substance’s chemical identity from the grade being quoted. When requesting a quotation, state the CAS number and ask the supplier to confirm the product name, composition, and commercial form in writing.
Core Functions and Common Applications
Industrial microbial control
Tris Hydroxyethyl Triazine is used as a biocidal active in certain industrial formulations. Depending on the product and applicable approvals, these formulations may be used to manage microbial growth in process fluids or water-containing systems. It should not be treated as a universal disinfectant, and a supplier’s product description should not replace an assessment of the specific application.
Oilfield and industrial water systems
Some grades are considered for oilfield-related systems and industrial water applications where microbial growth can affect process operation or product quality. Selection requires attention to water chemistry, temperature, contact conditions, system materials, and the target use. Buyers should verify that the intended application is covered by the product documentation and permitted under local rules.
Metalworking fluids and other formulated products
Triazine-based biocides may also be used in selected water-containing formulations, including some metalworking fluids. Compatibility must be assessed in the actual formulation, since the presence of other ingredients and operating conditions can affect stability and performance. Ask the formulator or supplier for guidance based on the complete formulation rather than relying only on the active ingredient’s name.
Product Forms and Material Options
Commercial offers can differ in concentration, carrier, and intended use. A buyer may encounter an aqueous product or another formulated grade, but availability and composition vary by supplier and market. Do not infer active content or physical properties from the CAS number alone.
When comparing options, request the concentration range and the basis on which it is reported, such as weight percentage. Also confirm whether the offered specification applies to the active ingredient or to the complete supplied product. These details help prevent errors when comparing quotations or planning formulation work.
If you want to learn more, please visit our website Huadingcheng.
Key Specifications to Review
A useful purchasing specification should describe measurable acceptance criteria, not only a chemical name. The following items are commonly worth reviewing with the supplier; exact limits should be agreed for the specific grade rather than assumed.
| Specification item | Why it matters |
|---|---|
| Identity and CAS number | Confirms the intended chemical and helps distinguish it from similarly named products. |
| Active content or concentration | Allows buyers to compare grades and calculate formulation requirements on a consistent basis. |
| Appearance and physical form | Supports receiving checks and helps confirm whether the delivered material matches the agreed grade. |
| pH, density, and relevant impurities | May be important for handling, formulation compatibility, and batch acceptance when included in the agreed specification. |
| Packaging and storage guidance | Helps determine whether the product can be received, stored, and handled under the buyer’s site conditions. |
Ask for a current technical data sheet (TDS) and safety data sheet (SDS) before purchase. For lot-level verification, request a certificate of analysis (COA) that reports the agreed parameters for the relevant batch. A COA is useful for checking conformance to a specification, but it does not independently establish suitability for every application.
How to Select a Grade and Supplier
Define the application before comparing prices
Start by documenting the intended use, process conditions, required supply form, and any internal restrictions. If the material will be used in a formulation, share the relevant compatibility requirements with the supplier while protecting confidential formulation details. A low unit price may not represent the best value if the offered concentration, packaging, or documentation does not meet the project needs.
Check regulatory and safety requirements
Biocidal substances and products can be subject to different rules depending on their use and destination market. Confirm the applicable registration, labeling, transport, and import requirements with qualified regulatory personnel before placing an order. Review the SDS for hazards, personal protective equipment, storage conditions, and spill-response information, and follow the supplier’s and site’s handling procedures.
Confirm supply and quality terms
Before purchase, agree on the product grade, specification limits, packaging type, batch documentation, delivery terms, and any sampling or inspection process. Ask whether the quoted product is available for the required order quantity and shipment schedule; do not assume that a quoted lead time or minimum order quantity applies to future orders. For recurring supply, establish how changes to product composition or specification will be communicated.
Common Procurement Mistakes
- Buying by name alone: The same chemical name may be used for products with different concentrations or formulations.
- Assuming CAS confirms grade: CAS 4719-04-4 identifies the substance, not every commercial specification or intended-use approval.
- Using generic performance claims: Effectiveness depends on the formulation and operating environment, so application-specific evaluation is necessary.
- Overlooking documentation: Missing or outdated SDS, TDS, and batch records can complicate review, handling, and receiving.
- Ignoring destination rules: Regulatory requirements may differ across markets and applications; verify them before shipment and use.
Supplier Support from Huadingcheng
At Huadingcheng, we support B2B buyers seeking Tris Hydroxyethyl Triazine CAS 4719-04-4 by discussing grade requirements, intended use, documentation needs, packaging, and delivery expectations. Product availability and commercial terms should be confirmed for each inquiry. We recommend that buyers share their target specification and destination market so the offered material can be reviewed against the project requirements.
For an initial inquiry, provide the required concentration or grade, expected order quantity, destination, preferred packaging, and any required quality documents. If you are evaluating the material for a new application, include the relevant process conditions and ask for the available technical information before conducting a controlled compatibility assessment. Final use and dosage decisions should be made by qualified personnel based on the product documentation, applicable regulations, and the complete system.
Conclusion: What Buyers Should Do Next
Tris Hydroxyethyl Triazine CAS 4719-04-4 is a triazine-based industrial chemical used in certain biocide formulations, with potential applications that may include oilfield, industrial water, and selected metalworking-fluid systems. The CAS number and molecular identity provide a starting point, but buyers still need to confirm the commercial grade, concentration, specification, safety information, and regulatory suitability. No single specification or performance claim should be assumed to apply to every product or operating environment.
To move forward, define the intended application, request the current TDS and SDS, and compare suppliers against an agreed specification and documentation checklist. Contact Huadingcheng with your target grade, quantity, destination, and packaging needs to discuss a suitable supply option and confirm the details available for your inquiry.
Comments
Please Join Us to post.
0